PTK-ECP1-10 Pentek ECP1-10 Pleated Sediment Filter 255481 1 micron - Single cartridge

Pentek ECP1-10 10" X 2.5" Filter is a 1 micron 10" standard sediment water filter, product number 255431. Pentek Sediment Filter 255431-43 is designed with specially formulated resin-impregnated cellulose and polyester fibers for stronger filter and larger surface. Pentek ECP110 filter contains 6 square feet of filtration surface, when other typical non-pleated filters contain only 4.5 square feet. The Pentek ECP1-10 water filters provide higher wet strength than regular cellulose cartridges. ECP1-10 sediment filter also provides high flow rate and dirt-holding capacity, while maintaining a minimal pressure drop. Pentek ECP1-10 Sediment Filter features: * Type: pleated sediment water filter cartridge * Micron Rating: 1 micron * Material: Pleated Cellulose / Polyester * Filter is pleated around a polyrpopylene core for added strength; the ends are immersed into thermo-setting vinyl plastisol. * Initial P (psi) at Flow Rate (gpm): <1 psi at 10 gpm (<0.1 bar at 38 L/min) Pentek / Ametek ECP1-10 1 micron 10" Pleated Sediment Filter Cartridge. Recommended for chlorinated water supplies. Cellulose may start to break down if bacteria is present, such as in non-chlorinated wells. Do NOT use if the water is microbiologically unsafe or of unknown quality without adequate desinfection. Pentek ECP1-10 Sediment Filter 225481-43 specifications: * Dimensions: actual 9-3/4" x 2-5/8" (248 mm x 67 mm), nominal 10"x2.5" * Micron Rating (Nominal): 1 Micron * Temperature Rating: 40 F to 125 F (4.4 C to 51.7 C) Will Fit PENTEK, Cuno, Filterite, Keystone, U.S. Water, Water Resources and most Harmsco filter housings. Also fit any other standard 10"x2.5" filter housing. Single cartridge

Click here to buy now - $7.95